Sealers
IMPORTANT TO ALWAYS TEST! To ensure the results will meet your expectations, always test product on a small hidden area of approximately 0.4 m2 (4 sq. ft.). Keep from freezing. Do not apply under blazing sun.
Clear Look (Satin Look EV)
Product Name: Clear Look
Product ID: SLR-TS-CL
Manufacturer: Techniseal
COVERAGE: 1 coat required
1 litre covers approx. 40 sq.ft.
4L = 150 Sq.ft
18.78L = 650 Sq.ft
Also available in 208.2 L size
This fantastic concrete sealer will provide your pavers with a natural protected appearance. The product is a transparent emulsion - specially designed to protect pavers, paving stones and slabs. It is ideal for protecting a wide range of outdoor areas, including driveways, patios, walkways and other pavements.
Colour Boost Plus
Product Name: Colour Boost Plus
Product ID: SLR-TS-CBPLUS-
Manufacturer: Techniseal
COVERAGE: 2 Coats required; coverage given allows for two coats.
3.78L = 150 sq.ft.
19.93L = 750 sq.ft.
This Concrete Sealant is a matt-finish high-performance sealer. It is ideal for protecting and enhancing paved areas such as the edges of pool, patios, stairs, walkways and retaining walls. It protects surfaces and helps enhance or restore their original colours.
High-technology penetrating liquid sealer
Enhances the colour of pavers
Oil-repellent, this paver sealing product facilitates cleaning by slowing down the penetration of oil, grease (i.e. barbecue areas) and dirt.
Waterproofs surfaces and helps prevent mildew
Protect pavers against damage caused by water.
Easy to apply, it offers maximum efficiency and durability.
Non-film forming - won't make the surface more slippery.
Natural Look
Product Name: Natural Look
Product ID: SLR-TS-NL
Manufacturer: Techniseal
COVERAGE: 2 coat required. Coverage given below allows for two coats.
1 litre covers approx. 32 sq.ft.
3.78L = 120 Sq.ft
18.93L = 600 Sq.ft
Also available in 208.2 L size
This paver sealant is the ideal treatment for potentially slippery areas such as pool decks, steps and patios. It leaves no film on the surface and is resistant to water damage caused by mold and erosion.
Water based
Preserves the natural look of pavers
Penetrating - ideal for slip-prone surfaces
Stain guard - repels contaminants
Non film forming
Wet Look WA
Product Name: Wet Look WA
Product ID: SLR-TS-WA
Manufacturer: Techniseal
COVERAGE: 1 coat required (optional second coat)
3.78L size = 150 sq.ft.
18.93 L = 750 sq.ft.
Forms a protective film, preventing the penetration of oil, water and dirt. This shielding layer protects the surface, while facilitating cleaning.
Simple to apply, this Concrete Paver Sealant penetrates the pores of concrete for maximum effectiveness and durability.
It won't flake, won't fade and will resist the assaults of weather such as the freeze-thaw cycles, sun, rain and calcium.
WA is an acrylic sealer that leaves a wet look to pavers or other outdoor surfaces, such as driveways, patios, parking lots and pedestrian areas. Esthetically pleasing, it beautifies and enriches the original colour of pavers.
Wet Look WL4
Product Name: Wet Look WL4
Product ID: SLR-TS-WL4-
Manufacturer: Techniseal
COVERAGE: 1 coat required (optional second coat)
4L size = 150 sq.ft.
18.93 L = 750 sq.ft.
Forms a protective film, preventing the penetration of oil, water and dirt. This shielding layer protects the surface, while facilitating cleaning.
Simple to apply, this Concrete Paver Sealant penetrates the pores of concrete for maximum effectiveness and durability.
It won't flake, won't fade and will resist the assaults of weather such as the freeze-thaw cycles, sun, rain and calcium.
Solvent based
Enhances the colour of pavers
Stain guard - forms a protective film
For bare surfaces only
Film forming